By late 1935, Edsel Ford, in consultation with the L.G. Treadway Company of New York City, was hard at work on a plan to add additional accommodations. A promotional brochure published by Treadway sums up the need for expansion:
“The Inn eventually became so popular that additional guest rooms were necessary. As the architectural plan of the Inn would not, with good taste or economic soundness, allow an addition, it was decided, after a thorough survey of the problem, to build separate cottages, or houses, to accommodate travelers. To be in keeping with the traditional environment these should be, externally, exact replicas of houses famous in American history, and, inside, afford the same comfort as enjoyed by guests at the Inn. The scheme calls for several houses to be grouped harmoniously as a Colonial Village.”
The brochure goes on to state that the landscape was to be carefully arranged, “such as might have grown around the original houses.”
The Treadway Company managed the Inn and the “Colonial Village” for just three more years, until 1939, when their contract expired. The Inn and the reproduction homes have endured and prospered over the decades. Today, visitors to Dearborn may experience these houses in much the same manner as guests in the 1930s. Fortunately for us, the Marriott Corporation, who manages the Village and Inn, have maintained the high standards set in the 1930s.
20th century, 1930s, Michigan, hotels, furnishings, Ford family, Edsel Ford, Dearborn Inn, Dearborn, by Charles Sable
Visitors to The Henry Ford may have noticed that we have a very special guest in the Driving America exhibit: GT40 chassis number 1075, one of the world’s most celebrated race cars. The car has six race victories to its credit, but it is best known for winning the 24 Hours of Le Mans – twice. Race fans know that Le Mans is not only the most prestigious event in motorsport, but also among the most grueling. Cars and drivers are pushed to their limits, running hard on the difficult course for 24 non-stop hours. Simply finishing the race is a major accomplishment. Winning is the capstone in any car’s career. Winning twice, well, that’s nothing short of extraordinary.
Car 1075 has its roots in Ford Motor Company’s legendary fight to beat Ferrari in the 1960s. After avoiding motor racing for many years, Ford jumped in with both feet in the early 1960s. The company actually tried to purchase Ferrari in 1963. It was a shrewd idea – the acquisition would have given Ford instant prestige and a massive head start in its racing efforts. But it was not to be. The two companies could not come to agreeable terms and the negotiations ended. Unable to buy the Italian automaker, Ford decided to beat it.
Ford turned to Eric Broadley, of British-based Lola Cars, to jump-start its sports car racing effort. Broadley designed a car based on Lola’s own sophisticated 1963 GT car and powered by Ford’s Indy Car 289-cubic inch V-8. The resulting racer stood a mere forty inches off the ground – hence its name, the GT40. Results in the 1964 season weren’t particularly promising, and Ford turned to its big NASCAR 427 V-8 to power the GT40 Mark II. The bigger engine started winning races in 1965, and a Ford-sponsored Mark II took the checkered flag at Le Mans in 1966. As if to prove the victory wasn’t a fluke, Ford came back and won again with the Mark IV in 1967. The Mark IV, having been designed and built entirely in the U.S. and piloted by Californian Dan Gurney and Texan A.J. Foyt, gave the 1967 win the further distinction of being an all-American effort.
Ironically, Ford’s domination with the big 427 engine provided a break for the smaller 289. The big engines regularly pushed cars past 200 miles per hour on the Le Mans circuit and French officials, fearing a catastrophic accident on a track designed for slower speeds, imposed a 305-cubic inch limit for 1968. The Mark I’s 289 cubic inches suddenly didn’t seem too few. Ford ended its involvement at Le Mans after 1967, but other teams continued to field GT40s. JW Automotive Engineering dominated the next two racing seasons with Mark I cars, including chassis 1075.
Mexican Pedro Rodriguez and Belgian Lucien Bianchi drove 1075 to its first Le Mans win in 1968. It was an unusually cold and wet race (held in late September, rather than the usual June, due to political unrest), but the drivers – and the car – performed flawlessly and held the lead for 17 of the 24 hours. It was the third win in a row for a Ford car, but the first for the original Mark I design. Sadly, Rodriguez and Bianchi both died in separate racing accidents within three years of their Le Mans triumph.
Car 1075 came back to Le Mans in 1969, this time with Belgian Jacky Ickx and Brit Jackie Oliver at the wheel. Ickx started the race with a bold protest against the fabled “Le Mans start,” in which drivers stood across the track, ran to their cars and then drove off – buckling their harnesses as they sped along. Ickx took his time getting to his car and carefully strapped himself in before setting off. Tragically, Ickx’s point about the inherent danger was proved on the first lap: British driver John Woolfe was killed in an accident before he had a chance to buckle his harness. The fatal crash foreshadowed one of the most dramatic Le Mans races. Car 1075 traded the lead with a Porsche 908 constantly during the last 2½ hours. On the last lap, the Mark I crossed the finish line a mere 100 yards ahead of the Porsche – in a race of more than 3,100 miles. With that second win, car 1075 earned its place in history and cemented the GT40’s reputation as one of the most successful cars in motorsport.
Matt Anderson is Curator of Transportation at The Henry Ford
1968 Ford Mark I, Chassis Number 1075
Competition History: Winner of Le Mans 24-hour in 1968 and 1969. Winner of BOAC International 500 in 1968. Winner of Spa 1000-kilometer in 1968. Winner of Watkins Glen 6-hour in 1968. Winner of Sebring 12-hour in 1969.
Europe, 1960s, 20th century, race cars, Le Mans, racing, Henry Ford Museum, Driving America, cars, by Matt Anderson
In 1903, Jack London was a young writer still in the early stages of his career. He was 27 years old when he published The Call of the Wild, the story that was destined to become an American classic and earn him a place in the canon of American literature. Drawing upon London’s experiences in the Klondike Gold Rush, The Call of the Wild is the story of Buck, a dog who is kidnapped from his idyllic home in northern California and thrown into the harsh life of a sled dog in the cold wilderness of the Yukon.
The Call of the Wild was first published in The Saturday Evening Post, a popular weekly magazine that featured a variety of content including articles on current events, editorials, illustrations, cartoons, poetry, and fiction. The magazine paid Jack London a sum of $750 for his story, the equivalent of almost $20,000 today. The Call of the Wild was published in five consecutive issues from June 20, 1903 to July 18, 1903. The first two of these issues are held in the collections of The Henry Ford, including the initial issue which features The Call of the Wild on the cover.
The Saturday Evening Post had widespread circulation; in fact, even Clara Ford had a subscription. Several of The Henry Ford’s issues from around 1903 bear an address label for Mrs. H. Ford at 332 Hendrie Ave., the address of the Fords’ residence in Detroit at the time. Henry Ford founded Ford Motor Company on June 16, 1903, just four days before The Call of the Wild was first published. When the final installment of The Call of the Wild was published a month later, Ford Motor Company had just sold their first car for $850, as recorded in their first checkbook. Coincidentally, the base price of the Model A car was $750, the same amount that Jack London received from The Saturday Evening Post for his story. (Ford Motor Company’s first customer paid an extra $100 for a tonneau, or backseat compartment, bringing the total for the car to $850.) I imagine that Henry Ford was quite busy building his fledgling company and didn’t have much time for leisure reading. However, it is interesting to think that he or his wife Clara might have read The Call of the Wild when it was first published, especially at a time when both Henry Ford and Jack London were on the verge of success that would lead them to become icons in American industrial and literary history, respectively.
Edsel Ford, the Treadway Company and the Founding of the Dearborn Inn
In the first piece, I discussed the unique nature of the Dearborn Inn, intended as an airport hotel and as a “front door” for visitors to our campus, Ford Motor Company and the Dearborn community. What I did not address was who conceived of the Inn and oversaw the project to its fruition. That individual was Edsel Ford. While it is generally acknowledged that Edsel Ford was a pivotal figure in the management of the Ford enterprise, individual achievements are rarely accorded to him. In the case of the Dearborn Inn, it is generally considered to be the conception of Henry Ford. While researching the scrapbook, I ran across reminiscences in our archives of Ernest Gustav Liebold (1884-1956), who served as Henry Ford’s executive secretary and financial manager. Mr. Liebold oversaw nearly all of Henry Ford’s business outside of Ford Motor Company. Mr. Liebold categorically states that the idea for the Dearborn Inn came from Mr. Edsel Ford. He continues to briefly discuss the construction of the Inn, specifically the interaction of architect Albert Kahn’s office with the Ford organization. Finally, Mr. Liebold states the following:
“Mr. Edsel Ford brought in Treadway to operate the Dearborn Inn. He also had Treadway at his Inn up in Maine. (Edsel Ford owned a large summer home near Seal Harbor, Maine.) Edsel bought it shortly after Mr. (Henry) Ford bought the Wayside Inn (in Sudbury, Massachusetts). He had that as an inn of his own, and Treadway operated it. Treadway was brought here at the same time and given a contract, I think for five years.”
This statement led me to investigate the Treadway Inn and its history. According to The Motel in America (1996) Treadway Inns were America’s earliest motel chain. They were founded accidentally by Mr. L.G. Treadway. In 1912 he took over operations at the Williams Inn at Williamstown, Massachusetts. (This inn continues today.) It was an old coaching inn, dating back to the early 19th century. Under Treadway’s management, the establishment was attractive, comfortable, and provided good meals. Treadway’s innovation came in 1920 when he and the owners of inns in nearby towns, specifically the Ashfield House of Ashfield, Massachusetts, and the Dorset Inn of Dorset, Vermont, combined resources. Guests were recommended to the associated inns, and employee exchanges took place. The three inns found economies of scale by combining advertising and purchasing; the resulting increase in business and decrease in costs brought increased profits – the affiliation grew into a chain, with many other New England inns added over time.
Each inn maintained its own character, but they all shared comfort, good food and efficiency. They did not attempt to duplicate the hotels of big cities, but rather extend to all travelers old-fashioned rural New England hospitality. Once established, the chain made its headquarters, ironically, in New York City and always included the trademark, “The Real New England Inns” with a distinctive logo of a colonial innkeeper pointing with a cane in the left hand, lantern held high in his right.
While traveling from Michigan to his summer home in Maine, Edsel Ford likely encountered the Treadway chain. After experiencing “The Real New England Inns” it must have been a foregone conclusion for Edsel Ford to invite Treadway to manage the Dearborn Inn. According to articles in Ford News, Ford Motor Company’s in-house magazine, announcing the Inn’s opening in the summer of 1931, a number of the Inn’s staff was recruited from Treadway Inns throughout New England.
The Treadway firm managed the Dearborn Inn until 1939, when the contract with Ford was not renewed. A subsidiary of Ford known as Seaboard properties operated the Inn until 1983, when the Marriott Corporation took over.
For more insights on the Dearborn Inn and lots of great images, take a look at Jennifer Czerwick Ganem’s Images of America: Dearborn Inn (Charleston, South Carolina: Arcadia Publishing, 2011).
Charles Sable is Curator of Decorative Arts at The Henry Ford.
20th century, 1930s, Michigan, hotels, Ford family, Edsel Ford, Dearborn Inn, Dearborn, by Charles Sable
Much of this cut glass would have been made in Ireland. Even today, when we think of cut glass, an Irish company—Waterford—is the first name that comes to mind.
Yet, these English and Irish artisans evolved a distinct recipe that differed in its composition from Venetian glass: a mixture containing calcinated flints and pebbles, and employing lead oxide as a flux, or binder. The lead gave their glass a higher degree of refraction, creating glass that, when cut, could exude a brilliance unseen in previous European wares, greatly increasing its reflective qualities. In the shadowy, candlelit rooms of the 18th century, this increased illumination was very welcome. Soon, these English and Irish glassmakers specialized in cut glass—clear glass, not colored, since it better showed the brilliance of the faceting. These English and Irish makers built factories during the first half of the 18th century as the unique refractive quality of their glass gained them worldwide fame.
As part of the British Empire, Ireland was subject to British trade policies. Indeed, from 1745 until 1780, the Irish glass industry was not allowed to compete with English-made glass within the British Empire. Irish entrepreneurs put pressure on the British Parliament and in 1780 all restrictions were lifted. This “Period of Freedom,” as it was known, continued until 1825, when Parliament reinstated the tariffs. During this relatively brief span, the Irish glass houses of Dublin, Belfast, Cork, and Waterford produced incomparable wares, based on contemporary English designs. During this period of free trade, Irish glassmakers exported a large amount of glassware of all kinds—everything from tiny salt cellars and wine glasses to large scale candelabras and chandeliers.
In addition to dining rooms where cut glass serving ware predominated, Irish cut glass might be placed in parlors and other public rooms. If the homeowner was very wealthy, a candlelit chandelier could find its way into a parlor, too.
During the late 1820s and 1830s, American entrepreneurs also began experimenting with machine-pressed glass as a less costly alternative to cut glass. One of the leaders in this field was the Boston and Sandwich Glass Company, based in Sandwich, Massachusetts. Their early works are known as “Lacy” glass, which have a stippled surface intended to hide wrinkles caused by machine pressing on cold glass. Early pressed glass manufacturers sought to imitate the motifs found in expensive cut glass, specifically those pieces made in English and Irish glass houses. Americans of all economic means soon adopted pressed glass, although for the very wealthy, demand continued for cut glass.
Irish glass as a force in the international marketplace declined precipitously in the years after 1825. The impact of inexpensive pressed glass combined with a reinstatement of tariffs quickly decimated Ireland’s glass industry. The last to close was the Waterford house in 1851. (The firm that we know today was reestablished in 1947.)
The legacy of Irish glass lies in the elegant tableware and chandeliers of deeply cut, prismatic glass that we treasure today.
The large and small diamond patterns on these 1825-1845 pressed glass plates derive from Anglo-Irish patterns (THF304774) and (THF113593).
Charles Sable is Curator of Decorative Arts at The Henry Ford.
Europe, 19th century, 18th century, manufacturing, home life, glass, decorative arts, by Charles Sable
Motion Picture Magazine, originally published in 1911, was the first movie fan magazine. This issue for September 1918 featured movie star Lillian Gish. / THF113869
From the beginning of the movie business, Americans wanted to know about the movies and their stars. As thousands of letters flooded movie studios, public relations departments tried to accommodate fans’ interest. By 1910, the demand for information was out of control. In February 1911, J. Stuart Blackton, head of Vitagraph Studios, helped to organize Motion Picture Story Magazine, soon shortened to Motion Picture Magazine — the first movie fan magazine.
California, 20th century, popular culture, movies, by Terry Hoover, archives
In 1906, the U.S. Congress passed the Pure Food and Drug Act, opening a path to government regulation of unsafe ingredients in ingestible consumer products. Before this, though, manufacturers did a booming business in “patent medicines,” concoctions that purported to cure a variety of ills, from colic to indigestion to sexually transmitted diseases to “female complaints.” They were frequently alcohol-based and contained any number of ingredients (most unadvertised), ranging from the harmless to the toxic. The Henry Ford has a collection of patent medicines from the late 19th and early 20th centuries, and we’ve just added a number of these to our online collections, including Dr. Page's Rail Road Pills. Over the upcoming weeks, we’ll also be adding results of chemical analysis of these medicines done in conjunction with the Department of Chemistry and Biochemistry at the University of Detroit, Mercy, in 2009. To get a sneak peek at the results for one of the medicines, check out “Dr. Tutt’s Liver Pills,” and click the “Specifications” tab to find out the contents. Or, see all our digitized patent medicines, along with related advertising and packaging.
19th century, patent medicines, healthcare, digital collections, by Ellice Engdahl
By 1953, Mr. Thompson was a war veteran with a family and a career as an engineering layout coordinator for the Army Signal Corps. He had reached his thirtieth birthday and could have easily settled into a comfortable existence. But he still wanted to be an automobile designer—a life goal he never lost sight of. He decided to enter a contest sponsored by Motor Trend magazine, with four winners each receiving an Art Center College of Design scholarship. His turbine car, which would incorporate reinforced plastic (an unusual choice of material at the time), won him a scholarship. He started at the Art Center in Los Angeles that same year, and was the first African American enrolled in their prestigious Transportation Design department. After graduating in 1956, he interviewed for an automotive design position with just one automaker: Ford Motor Company. He got the job.
Mr. Thompson didn’t just land the position he had dreamed of since the day that shining car caught his eye; he made history by becoming the first African American automobile designer.
He started at Ford’s Advanced Studio, where designers worked free from creative restrictions. On his first day, he was told by the Vice President of Ford Design, George Walker, “You can go as far as your talent will take you.” Mr. Thompson’s early design work included the Light Cab Forward truck, and he contributed sketches for the Mustang and the futuristic Gyron concept car. He also envisioned a forward-thinking project that had the potential to change the world.
In 1965, Mr. Thompson took his innovative idea to Ford: an all-terrain vehicle for the Third World that would have economic and social consequences. He understood that rising countries needed good transportation, and that a vehicle had to satisfy the needs of the population. He knew that like the Model T, his car should be relatively easy to build and maintain, and that production costs must be kept to a bare minimum. But Mr. Thompson’s vision extended beyond this vehicle. He anticipated his auto plants—located in the developing nations that would use car—bringing jobs, better roads and eventual economic independence to host countries. He believed automobile manufacturing would “help develop the economy as it did in the United States.”
The name he chose for the automobile that would make this grand plan possible was “the Warrior.” The car was actually intended to be the first in a series of vehicles, including a half-ton pickup truck, a six-passenger bus (an early version of the minivan), as well as boats and containers (buoys, pontoons, etc.). They would be constructed using a strong space age plastic material produced by Uniroyal called Royalex.
Though Ford was very supportive, the company ultimately passed on the project in 1967. Mr. Thompson still believed the car could succeed, and he recruited friends to invest in or assist with developing the vehicle for the African market. One of those friends and investors was Wally Triplett, who had broken a barrier of his own in 1949 as the first African American to play in the National Football League (for the Detroit Lions).
Mr. Thompson rented a garage on Detroit’s west side and went about building the Warrior. Still working at Ford during the day, he spent at least six hours a night—plus weekends—on the vehicle. “My family was very good about that. My wife knew how badly I wanted to do this,” he recalled. Mr. Triplett assisted, and was the only other individual involved in its construction.
The prototype was modeled on the Renault R-10, a small four-door sedan. Indeed, the Warrior’s chassis came directly from a disassembled R-10. Base mechanical components, including the engine, were also incorporated. Renault already had a distribution system overseas, providing a ready-made parts supplier for Mr. Thompson’s customers. Mr. Thompson and Mr. Triplett designed and built the tools to form the sections of the body, which were then sent off to Uniroyal, who molded the Royalex plastic.
While major work on the Warrior was complete by 1969, it’s likely that modifications were made to the vehicle through the mid-1970s while continued attempts were made to turn the vision into reality.
The partners talked of building the car in Detroit themselves, but were denied a bank loan; Mr. Triplett believes race played a role. African nations were courted, but instability on the continent derailed those opportunities. As for Ford Motor Company, the automaker—like others—didn’t believe the car would sell in large enough numbers to warrant the investment. Mr. Thompson eventually stopped looking for funding, closing up shop on the Warrior in 1979. Still, he kept in touch with his project’s supporters, in the event something came up, but alas, “nothing ever came of it.”
Nevertheless, Mr. Thompson never lost faith in the Warrior, and kept the car as a leisure vehicle. He took it off-road in Northern Michigan’s sand dunes, and drove the car on family vacations. He even used it for running errands, usually attracting a fair amount of attention. Though the Warrior was never mass-produced, Mr. Thompson’s many years of driving the prototype proved it was a sound vehicle. The car got a respectable 35-40 miles per gallon on the highway and 25-27 in the city. Maximum speed was 75-80 mph. The Warrior is now a part of The Henry Ford collection.
The Warrior project was ahead of its time in design and philosophy. The use of plastic, so common today, was revolutionary at the time. Mr. Thompson’s larger economic prophecy was partially fulfilled in 1995 when the URI, an all-terrain vehicle designed for African topography, was manufactured in the small town of Witvlei, Namibia. The URI plant became Witvlei’s largest employer, providing economic stability to the area.
After retiring, Mr. Thompson put together a traveling exhibit of the history of the African American designers at Ford. He wanted to show African American kids that his dream job was a career option for them, too. He traveled with the exhibit, standing next to it at malls and museums, happily fielding questions from curious visitors.
Sadly, Mr. Thompson suffered from Parkinson’s disease later in life. McKinley Thompson Jr. passed away in 2006 at the age of 83.
“I regret I wasn’t able to get it going,” he lamented to The Henry Ford regarding the Warrior, a project in which he had invested so much work and faith. But he was quick to add that “God has blessed a certain number of people in the world with talent and ability and I’ve always felt that those people that have that blessing—creativity and imagination—owe it to the rest of the population to make life as good as it can be. It was rewarding to me to know that I was trying to make that kind of an effort. I felt good about that.”
Bart Bealmear is a research support specialist in the Archives & Library at The Henry Ford.
Learn more about the Warrior automobile, McKinley Thompson, and Wally Triplett with these sources:
Archives materials available in the BFRC Reading Room:
Oral History Interview with McKinley W. Thompson Regarding the 1974 Warrior Concept Car (2001.162.2)
Wally Triplett Collection (2004.40.0). Includes the photograph album, “White Paper to Wheels” and an oral history with Mr. Triplett (2004.40.1)
“Design Pioneers: Vanguards of Progress, Part II,” Isdesignet, September 1996. Archives Vertical File, African-American Workers – Inventions
Books and magazine articles:
Farrell, Jim and Cheryl. Ford Design Department: Concept and Show Cars, 1999.
“From Dream to Drawing Board to…?,” Motor Trend, September 1953
“Inspirations from McKinley Thompson,” Innovation, Winter 1999
Detroit, Michigan, 20th century, Ford workers, Ford Motor Company, entrepreneurship, design, cars, by Bart Bealmear, African American history
By 1830, foods that required refrigeration were staples of American diets. For decades, rural communities in colder regions of the country had harvested ice to keep certain foods from spoiling during the summer months. But as American cities swelled in the nineteenth century, so did the demand for fresh meat, dairy products, fruits and vegetables, and even beer. Before long, the local, small-scale ice harvest grew into a major industry. Wherever ice on a pond, canal, lake, or reservoir was thick enough, companies deployed teams of men, horses, and machines to harvest it for distribution across the United States.
Some of the ice harvesters worked as farmers or fishermen in warmer months; some were imported from nearby cities to work the ice fields. Whatever their makeup, when ice harvesting crews gathered in January and February, they faced a complex and sometimes dangerous challenge. First, the ice had to be scraped clear of snow and, when the surface was too rough to be cut, planed smooth. Workers bored holes to measure the thickness of the ice, and then used a marker or groover to etch a grid of rectangles across the ice field. Next, an ice plow followed these lines, cutting about two-thirds of the way into the ice. If the ice was going to be used locally, the rectangular blocks of ice – called “cakes” – were chipped off and loaded onto wagons or sleighs for direct delivery. Otherwise, harvesters broke off large sections of the grooved ice field using saws and other hand tools. Workers guided these rafts of ice through a channel, where men broke the sheets into individual cakes and fed them up an elevator conveyor into an ice house. There, workers arranged the ice cakes into layers for storage and later delivery. If the ice house was located along the railway – and many were – blocks of ice could be loaded directly into refrigerated rail cars.
Saige Jedele is Associate Curator, Digital Content, at The Henry Ford.
The collections of The Henry Ford contain hundreds of hats and headgear, most of which are not on public display. We’ve just added a number of hats to our digital collections, including this sailor hat, dating from the late 19th or early 20th century. View over 160 hats and related objects on our collections website.
Ellice Engdahl is Digital Collections and Content Manager at The Henry Ford.
